Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Ace Glass, Inc. PTFE tubing, 1.5mm ID, 0.3mm wall, 3 meters
PTFE tubing, 1.5mm ID, 0.3mm wall, 3 meters
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Norprene Food-Grade, 1/4"" ID x 3/8"" OD; 50 ft
This tubing is ideal for the food, dairy, and beverage industries. Characteristics include heat, ozone, and UV light resistant; non-aging; nonoxidizing; superior acid and alkali resistance. Tubing is manufactured according to GMP and has a temperature range of ¿60 to 275¿F (¿51 to 135¿C). Sterilize with autoclave.
Accuflow Systems C-Flex Tubing, Saint Gobain, 082, TPE, thermoplastic elastomer, weldable, 50ft
C-Flex Tubing, Saint Gobain, 082, TPE, thermoplastic elastomer, weldable, 50ft
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Peroxide-Cured Silicone, 1/2"" ID x 3/4"" OD; 25 ft
Applications: Pharmaceutical, biotechnology, food and beverage, aerospace, and general lab applications. Characteristics: Peroxide-cured, excellent heat resistance, low compression set, odorless, nontoxic, translucent. Certification: Elastomer is FDA-compliant (21 CFR 177.2600) and meets USP Class VI requirements. Tubing is manufactured according to GMP. Temperature range: -60 to 460¿F (-51 to 238¿C) Sterilize: Autoclave or gamma irradiation.
Accuflow Systems Saint-Gobain Tygon Power Tubing, 1/2 in ID, 50 ft
Tygon Power F-4040-A tubing is a hydrocarbon-resistant PVC formulation designed for fuel and lubricant transfer. It resists swelling and hardening from hydrocarbon-based fluids, offers low extractables to reduce contamination risk, and is suitable for small-engine fuel lines, automotive, and industrial lubrication applications.
- Hydrocarbon-resistant PVC formulation for fuel and lubricant service.
- Inner diameter 1/2 in, outer diameter 3/4 in, wall thickness 1/8 in.
- Standard length 50 ft roll.
- Yellow color for fluid identification.
- Hardness 57 Shore A.
- Maximum recommended operating temperature 165°F (74°C).
- Low extractables to minimize contamination of transferred fluids.
- Typical uses: small engine fuel lines, general automotive, recreational vehicles, lawn and garden equipment, coolant transfer, heating fuels, cutting compounds, polishing equipment, lubrication lines.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Tygon 3370 I.B. Reinforced Platinum-Cured Silicone, 3/4"" ID x 1-1/8"" OD; 50 ft
Formulation: Tygon 3370 I. B., silicone, platinum cured. Applications: Demanding sanitary high-pressure pharmaceutical, biotechnology, food and beverage, and cosmetic applications. Characteristics: Excellent heat resistance, low compression set, odorless, and nontoxic. Translucent. Certification: Elastomer is FDA-compliant (21 CFR 177.2600) and USP Class V extractables; exceeds Class VI implant; exceeds 3A Sanitary Standards; produced to Bulk Pharmaceutical cGMPs (FDA 21 CFR 210, 211). Tubing manufactured according to GMP Temperature range: ¿60 to 320¿F (¿51 to 160¿C) Sterilize: With autoclave, ethylene oxide, or gamma irradiation.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Platinum-Cured Silicone, 5/16"" ID x 1/2"" OD; 25 ft
Applications: Pharmaceutical, biotechnology, aerospace, food and beverage, and general lab applications. Characteristics: Platinum-cured, excellent heat resistance, low compression set, odorless, nontoxic, translucent. Certification: Elastomer is FDA-compliant (21 CFR 177.2600) and meets USP Class VI; exceeds 3A Sanitary Standards. Tubing is manufactured according to GMP. Temperature range: -58 to 446¿F (-50 to 230¿C) Sterilize: Autoclave or gamma irradiation.
ATLANTIC BIOPHARM SOLUTIONS LLC VENAIR .25ID X .375OD 50FTROLL
Venair .25 in ID x .375 in OD, platinum cured silicone tubing, 60shA, 50 foot roll
Accuflow Systems Saint-Gobain Tygon Tubing, Platinum-Cured Silicone, 1/4 in ID, Braid-Reinforced
Braid-reinforced, platinum-cured silicone tubing with a 1/4 in (6.35 mm) inner diameter and 0.515 in (13.08 mm) outer diameter, supplied in 50 ft (15.24 m) coils. Designed for sanitary, high-purity fluid transfer and pressure applications in bioprocessing, pharmaceutical, and food and beverage manufacturing. Autoclavable and compatible with gas and radiation sterilization; engineered for elevated working pressure and thermal stability.
- Braid-reinforced construction for elevated working pressure and durability.
- Platinum-cured silicone provides chemical compatibility and thermal resistance.
- 1/4 in (6.35 mm) I.D., 0.515 in (13.08 mm) O.D., 50 ft (15.24 m) coil.
- Maximum working pressure 150 psi at 73°F, 105 psi at 320°F.
- Autoclavable; compatible with ethylene oxide and gamma radiation sterilization.
- Meets USP Class VI, FDA 21 CFR 177.2600, and 3-A sanitary standards.
Chata Biosystems Quick Connect with 1/4" ID Tubing and Clamp
Designed to connect our CHEM+NECT system to yours, our Quick Connect with 1/4" ID Tubing and Clamp will allow you to quickly and safely extract fluids.
AVANTOR MASTERFLEX (VWR LLC) TUBING MFLEX PHARMED 24 300FT
Masterflex L/S Spooled High-Performance Precision Pump Tubing, PharMed BPT, L/S 24; 300 ft, Avantor